TSSQB2 2000 Litre Quickbund Portable Bunding
The Australian made Quickbund 2000 litre Portable Bunding System provides a safe and secure area for dealing with a wide range of liquids including acids, caustics, oils & fuels. Manufactured from HRL36 Engineered Membrane, the high-frequency welded seams ensure no leaking and provide maximum strength.
The fold-down walls allow for vehicle, hand truck, pallet jack and forklift access.
Click Here to see how easy it is to erect.
- Reviews (0)
- Chemical Resistance Guide
Contain the entire contents of up to 9 x 205L drums with this 2000 litre portable bunding unit.
Manufactured from HRL36 engineered membrane it has outstanding chemical resistance.
All seams are high-frequency welded to provide maximum strength in even the most demanding environments.
No tools need for erection. Simply position the 15000L portable bund and unfold.
Application: Temporary and field storage of dangerous goods
Deployed Size: 2.5m x 2.5m x 300mm
Pack Size: 700 x 700 x 100mm
|Dimensions||2500 × 2500 × 300 mm|
700 x 700 x 100 mm
Chemical storage facilities.
Spill Station Quickbund Chemical Resistance Guide
CHEMICAL Rating CHEMICAL Rating
AFF ND JP-4 jet Fuel A
Acetic Acid (5%) A JP-5 Jet Fuel A
Acetic Acid (50%) B JP-8 Jet Fuel A
Ammonium Hydroxide A Kerosene A
Ammonium Phosphate A Magnesium Chloride A
Ammonium Sulfate A Magnesium Hydroxide A
Antifreeze (ethylene glycol) A Methanol A
Animal Oil A Methyl Alcohol A
Aqua Regia X Methyl Ethyl Ketone X
ASTM Fuel A A Mineral Spirits A
ASTM Fuel B A Naphtha A
ASTM Fuel C A Nitric Acid (5%) A
Benzene X Nitric Acid (50%) B
Calcium Chloride Sol’n A Phenol X
Calcium Hydroxide A Phenol Formaldehyde B
Chlorine solution (20%) A Phosphoric Acid (50%) A
Corn Oil A Phosphoric Acid (100%) B
Crude Oil A Potassium Chloride A
Diesel Fuel A Potassium Sulfate A
Ethanol A SAE-30 Motor Oil A
Ethyl Acetate X Salt Water (25%) A
Ethyl Alcohol A Seawater A
Fertilizer solution A Sodium Acetate Sol’n A
Fluosilicic Acid (30%) A Sodium Bisulfite Sol’n A
Fuel Oil #2 A Sodium Hydroxide (25%) A
Fuel Oil #6 A Sodium Phosphate A
Furfural X Sulphuric Acid (50%) B
Gasoline A Tannic Acid (50%) A
Glycerin A Toluene X
Hexane A Transformer Oil A
Hydraulic Fluid (ester) X Turpentine B
Hydrochloric Acid (30%) A UAN ND
Hydrofluoric Acid (3%) A Urea Formaldehyde A
Hydrofluoric Acid (50%) A Vegetable Oil A
Isopropyl Alcohol A Water (200F) A
Ivory™ Soap A Xylene X
Jet A A Zinc Chloride A
A – Should have little or no effect on the material at the given concentration and temperature
B – Some effect on the material at the given concentration and temperature. Caution advised
X – Not recommended.
ND – No data available
Spill Station Australia email@example.com Ph 1300 66 42 66
The information contained herein or that is supplied by us, or on our behalf, is based upon data obtained through our own research and is considered accurate. However, No Warranty is expressed or implied regarding the accuracy of this data, the results obtained from the use thereof, or that any such use will not infringe upon any patent. This information is furnished upon the condition that the person receiving it shall evaluate its suitability for the specific application.