Outdoor Stainless Steel Safety Shower & Eyewash
Standard shower/eye wash units can deliver a non-compliant first flush due to water held in the shower pipes overheating in direct sun. AS4775:2007 and ANSI compliant self-draining emergency safety shower is suitable for use in any area exposed to direct sunlight.
This unit drains all of the water out of the standpipe to prevent overheating resulting in non-compliance.
The bleed pipe is fitted above the valve removing the risk of further injury to the operator caused by water heated beyond tepid temperature.
Pipework, fittings and valves are full stainless steel. All units come with signage.
The foot operation pedal and eyewash bowl/drainpipe in the picture are available as optional extras.
H-D5017SPI Combination Shower/Eyewash
H-D5017B Combination Shower/Eyewash with Bowl and Drainpipe
H-D5017F Combination Shower/Eyewash with Foot Pedal
H-D5017BF Combination Shower/Eyewash with Bowl, Drainpipe and Foot Pedal
|MATERIALS OF CONSTRUCTION|
|PIPEWORK AND FITTINGS||304L stainless steel with 150lb medium wall tubulars and fittings|
|OPERATING VALVES||316 stainless steel 2 piece stay open valve|
|SHOWER SPRAY OUTLET||Nylon 6 nozzle|
|EYE/FACEWASH BOWL||304L stainless steel|
|EYE WASH DIFFUSERS||Chrome plated brass with stailess steel mesh|
|STANDARD FINISH||Brushed finish|
|WATER INLET||1¼” female BSP|
|DESIGN OPERATING PRESSURE||2.0 to 6 BAR G (28 to 87 PSI)|
|TEST PRESSURE||10.3 BAR G (149 PSI)|
|MINIMUM FLOW AT OPERATING PRESSURE||Shower: 76 litres/minute Eye/facewash: 12 litres/minute|
|WEIGHTS AND DIMENSIONS|
|ASSEMBLED DIMENSIONS||360mm X 840mm X 2100mm|