Immersion Heated 1500L Emergency Tank Shower

Indoor Temperature Controlled Safety Shower

Intended for indoor use, the 300 litre tank and 3kW immersion heater ensure delivery of tepid water for the ANSI recommended minimum period of 15 minutes. Incorporating a heated tank, overhead shower and front-mounted eye/face wash with protective lid as standard. The unit can also be used to supply heated water to another emergency safety shower via a second outlet. Suitable for use in hazardous areas.

Weight	230 kg
Dimensions	1262 × 1532 × 2729 mm
Features	High flow rate thermostatically controlled mixing valve ensures the temperature is maintained at between 20-25°C. Eye/face wash with integral lid ensures that the bowl remains clean and free from contamination The unit can also be used to supply heated water to other emergency safety showers in the local vicinity via a second outlet . 316L stainless steel inner pipework for improved corrosion resistance. Location: Indoor, Outdoor Climate: Cold (risk of freezing), Variable Constant Water Supply: Yes Installation: Free Standing / Floor Mounted Features: Eye/Face Wash Pipework: Stainless Steel
Pipework & Fittings	316L stainless steel with 150lb medium wall tubulars and fittings
Frame	316L stainless steel
Operating Valves	316L stainless steel
Shower Spray Outlet	Moulded nylon 6
Eye/facewash Filter Strainer	316L stainless steel
Insulation & Outer Casing	Polyurethane foam insulation with a medium density polyethylene impact resistant outer casing on the pipework, GRP on outer frame
Standard Finish	White with green/white safety stripes (alternative colours available)
Water Inlet	1 1/4” Male BSP
Design Operating Pressure	2.2 to 6 BAR G (32 to 87 PSI) (higher supply pressures accommodated with the incorporation of the optional pressure reducing valve)
Water Temperature Set Point	20º C to 25º C (68 F to 77º F)
Heating Type	Trace tape heated and pre-insulated pipework, immersion heated tank
Heating Load	3 kW
Electrical Equipment - Non-hazardous	Suitable for use in areas classified as non-hazardous
Electrical Equipment - Hazardous	ATEX Zone 1 & 2 Gas Groups IIA and IIB, Temp Class T3 (IIC available)
Electric Supply	230V Single Phase, 50/60Hz or 110V available
Test Pressure	10 BAR G (145 PSI)
Minimum Flow at Operating Pressure	Shower – 76 litres/minute Eye/Face wash – 20 litres/minute
Minimum Ambient Operating Temperature	0º C (32º F)
Maximum Ambient Operating Temperature	35º C (95º F)
Shower Operation	Pull handle (Optional treadle foot control for hands free operation)
Eyebath/face Wash Operation	Lift lid up (Optional treadle foot control for hands free operation)