Immersion Heated 1500L Emergency Tank Shower

Designed to meet and exceed ANSI and Australian standards, this immersion heated emergency tank shower provides tepid water in cold environments for over 15 minutes at a guaranteed flow of 76 litres per minute, even when there is no mains water supply. Suitable for use in hazardous and non-hazardous environments.

Integral immersion heater, controlled by a dual thermostat, maintains the water in the tank at a constant temperature
Low pressure shower rose delivers large quantities of water in an even pattern that is non-injurous to the user
Thermal insulation assists in maintaining the water temperature in the tank
Instant activation by panic bar or optional foot panel
Optional eye/face wash can be mounted internally or externally

Electrical supply: 230V Single Phase, 50/60Hz (110V optional)

Weight	340 kg
Dimensions	1420 × 1495 × 3746 mm
Features	Integral immersion heater, controlled by a dual thermostat, maintains the water in the tank at a constant temperature. Low pressure shower rose delivers large quantities of water in an even pattern that is non-injurous to the user. Thermal insulation assists in maintaining the water temperature in the tank to international standards in all climates. Instant activation by panic bar or optional foot panel. Optional eye/face wash can be mounted internally or externally. Optional chiller unit for hot climates. Electrical supply: 230V Single Phase, 50/60Hz (110V optional). Location: Indoor, Outdoor Climate: Hot (risk of over-heating), Cold (risk of freezing), Variable Installation: Free Standing / Floor Mounted Features: Eye/Face Wash Framework: Stainless Steel Capacity (Litres): 1500
Inlet Connection Size & Type	3/4” BSP Female
Shower Operation	Panic bar (optional foot panel control)
Eye/face Wash Operation	Lift lid up (optional foot treadle control)
Supply Pressure	0.5 to 10 BAR G (7 to 145 PSI)
Flow at Operating Pressure	Shower – 76 litres/minute Eye/Face wash – 12 litres/minute
Electrical Equipment - Non-hazardous	Suitable for use in areas classified as non-hazardous
Electrical Equipment - Hazardous	ATEX Zone 1 & 2. Gas groups IIA & IIB. Temp Class T3 (IIC available)
Materials of Construction	Shower Rose: GRP stainless steel Piping & Valve Materials: uPVC and stainless steel Control Valve – Shower: uPVC 11/2” BSP ball valve Control Valve – Eye/face Wash: 1/2” 316L stainless steel full flow ball valve with stainless steel ball Eye/face Wash Strainer: 1/2” stainless steel Overflow: 1” BSP uPVC Ballcock Valve: 2 x 1/2” BSP brass Water Tank: 1500 litre (396 US Gallons) capacity heavy density polyethylene HDPE Tank Surround and Lid: Heavy-duty GRP in white (green or yellow available) Shower Frame and Legs: Stainless steel. Polished brush finish (paint options available) Pull Rods for Valve Activation: Stainless steel Foot Control Options: Panel foot control – Stainless steel/Treadle foot control – powder coated stainless steel All Fasteners and Fixings: Stainless steel
Minimum Ambient Operating Temperature	16º C (60º F) (For 0º C (32º F)
Maximum Ambient Operating Temperature	40º C (104º F) (+55º C (131º F) with cooling unit fitted)

Weight

340 kg

Dimensions

1420 × 1495 × 3746 mm

Features

Integral immersion heater, controlled by a dual thermostat, maintains the water in the tank at a constant temperature.
Low pressure shower rose delivers large quantities of water in an even pattern that is non-injurous to the user.
Thermal insulation assists in maintaining the water temperature in the tank to international standards in all climates.
Instant activation by panic bar or optional foot panel.
Optional eye/face wash can be mounted internally or externally.
Optional chiller unit for hot climates.
Electrical supply: 230V Single Phase, 50/60Hz (110V optional).
Location: Indoor, Outdoor
Climate: Hot (risk of over-heating), Cold (risk of freezing), Variable
Installation: Free Standing / Floor Mounted
Features: Eye/Face Wash
Framework: Stainless Steel
Capacity (Litres): 1500

Inlet Connection Size & Type

3/4” BSP Female

Shower Operation

Panic bar (optional foot panel control)

Eye/face Wash Operation

Lift lid up (optional foot treadle control)

Supply Pressure

0.5 to 10 BAR G (7 to 145 PSI)

Flow at Operating Pressure

Shower – 76 litres/minute
Eye/Face wash – 12 litres/minute

Electrical Equipment - Non-hazardous

Suitable for use in areas classified as non-hazardous

Electrical Equipment - Hazardous

ATEX Zone 1 & 2. Gas groups IIA & IIB. Temp Class T3 (IIC available)

Materials of Construction

Shower Rose: GRP stainless steel
Piping & Valve Materials: uPVC and stainless steel
Control Valve – Shower: uPVC 11/2” BSP ball valve
Control Valve – Eye/face Wash: 1/2” 316L stainless steel full flow ball valve with stainless steel ball
Eye/face Wash Strainer: 1/2” stainless steel
Overflow: 1” BSP uPVC
Ballcock Valve: 2 x 1/2” BSP brass
Water Tank: 1500 litre (396 US Gallons) capacity heavy density polyethylene HDPE
Tank Surround and Lid: Heavy-duty GRP in white (green or yellow available)
Shower Frame and Legs: Stainless steel. Polished brush finish (paint options available)
Pull Rods for Valve Activation: Stainless steel
Foot Control Options: Panel foot control – Stainless steel/Treadle foot control – powder coated stainless steel
All Fasteners and Fixings: Stainless steel

Minimum Ambient Operating Temperature

16º C (60º F) (For 0º C (32º F)

Maximum Ambient Operating Temperature

40º C (104º F) (+55º C (131º F) with cooling unit fitted)

Add to Quote

TECHNICAL DATA
INLET CONNECTION SIZE & TYPE	3/4” BSP Female
SHOWER OPERATION	Panic bar (optional foot panel control)
EYE/FACE WASH OPERATION	Lift lid (optional foot treadle control)
SUPPLY PRESSURE	0.5 to 10 BAR G (7 to 145 PSI)
FLOW AT OPERATING PRESSURE	Shower – 76 litres/minute (20 US gallons). Eye/Face wash – 12 litres/minute (3 US gallons)
ELECTRICAL EQUIPMENT – Non-hazardous	Suitable for use in areas classified as non-hazardous
ELECTRICAL EQUIPMENT – Hazardous	ATEX Zone 1 & 2. Gas groups IIA & IIB. Temp Class T3 (IIC available)
ELECTRICAL SUPPLY	230V, single phase, 50Hz (110V optional) MATERIALS OF CONSTRUCTION
SHOWER ROSE	GRP and stainless steel
PIPING & VALVE MATERIALS	uPVC and stainless steel
CONTROL VALVE – SHOWER	uPVC 11/2” BSP ball valve
CONTROL VALVE – EYE/FACE WASH	1/2” 316L stainless steel full flow ball valve with stainless steel ball
EYE/FACE WASH STRAINER	1/2” stainless steel
OVERFLOW	1” BSP uPVC
BALLCOCK VAVLE	2 x 1/2” BSP brass
SHOWER VALVE LEVERS	Red reinforced nylon 6
EYE/FACE WASH VALVE LEVERS	Stainless steel
WATER TANK	1500 litre (396 US Gallons) capacity heavy density polyethylene HDPE
TANK SURROUND AND LID	Heavy-duty GRP in white (green or yellow available)
SHOWER FRAME AND LEGS (K)	Galvanised steel
SHOWER FRAME AND LEGS (KS)	Stainless steel. Polished brush finish (paint options available)
PULL RODS FOR VALVE ACTIVATION	Stainless steel
FOOT CONTROL OPTIONS	Panel foot control – GRP/Treadle foot control – powder coated stainless steel
ALL FASTENERS AND FIXINGS	Stainless steel
ENVIRONMENTAL OPERATING TEMPERATURE
MINIMUM AMBIENT OPERATING TEMPERATURE	-35º C (-31º F)
MAXIMUM AMBIENT OPERATING TEMPERATURE	40º C (104º F) (+55º C (131º F) with cooling unit fitted)
WEIGHTS AND DIMENSIONS
DIMENSIONS (WxDxH)	1420mm (55.9in) x 1495mm (58.9in) x 3746mm (147.5in)
1500 LITRE – no options	340kg (750lbs)

OPTIONS
GRP PANELLING TO 3 SIDES	TEMPERATURE INDICATOR 4” DIAL
SUN SHIELDS – SET	IMMERSION HEATER – FLP
SUMP FRAME & FOOT GRATING	IMMERSION HEATER – NON FLP
SHOWER PANEL FOOT CONTROL	CHILLER UNIT – FLP
EYE WASH TREADLE FOOT CONTROL	CHILLER UNIT – NON FLP
EYE/FACE WASH	LIGHT – FLP
POINTER LEVEL INDICATOR	LIGHT – NON FLP

Immersion Heated 1500L Emergency Tank Shower

Subscribe To Our Newsletter

Our Most Popular Products

SPILL STATION® AUSTRALIA

SPILL STATION® WAREHOUSE

SPILL STATION® SINGAPORE

Immersion Heated 1500L Emergency Tank Shower

Related products

Subscribe To Our Newsletter

Our Most Popular Products