H-STD45GM Portable Interim Eye/Face Wash
Hughes Safety H-STD45GM is a unheated mobile self-contained emergency eye/face wash which incorporates a polypropylene lined cylinder, a stainless steel frame and large pneumatic tyres, making it easy to manoeuvre by one person. Also available as combination shower & eyewash H-STD40K45G or shower only H-STD40K models.
- Additional Info
- Reviews (0)
|Dimensions||740 x 1365 x 2400 mm|
740 x 1110 x 1450 mm
Location: Indoor, Outdoor
|Pipework & Fittings||
316L Stainless Steel & ABS Plastic tubulars & fittings (top arm)
316L Stainless steel
|Shower Spray Outlet||
Machine moulded nylon 6
White gloss painted tank
|Design Operating Pressure||
1.2 BAR G – PRE SET (17 PSI)
10.3 BAR G (149 PSI)
|Minimum Flow Rates||
Shower: 76 litres/minute minimum
|Minimum Ambient Operating Temperature||
5º C (41º F)
|Maximum Ambient Operating Temperature||
35º C (95º F)
Eye/face Wash Operation: Pull lid forward
The H-STD45GM portable safety eye/face wash is designed as a quick response, first-aid device for use where a plumbed-in unit is not available and must therefore be backed up by a method of further decontamination.
This unit is easily filled by connecting to a mains water supply via a 15 or 20 mm hose pipe; it is then easily maneuvered to its required position, either by hand, or by fitting an ‘A’ frame (optional) and hooking up to a standard tow ball on a vehicle.
The wheel centres on the optional trolley can be adjusted to enable the unit to be taken through a standard door opening allowing it to be used in laboratories and work rooms etc.
The 114 litre carbon steel cylinder is polypropylene lined to avoid internal corrosion. The exterior is painted with acid resistant white enamel paint and fitted with pictogram ‘Emergency Shower’ signs to International Standard ISO 3864-1 and green and white safety stripes.
Note: Suitable for temporary use and capable of delivering a flush of water for over 1 ½ minutes.