Indoor Temperature Controlled Safety Shower

H-STDTC100KS11K Indoor Temperature Controlled Safety Shower with Eye/Face Wash

Intended for indoor use, the 300 litre tank and 3kW immersion heater ensure delivery of tepid water for the ANSI recommended minimum period of 15 minutes. Incorporating a heated tank, overhead shower and front-mounted eye/face wash with protective lid as standard. The unit can also be used to supply heated water to another emergency safety shower via a second outlet. Suitable for use in hazardous areas.

Product Code: H-STDTC100KS11K Categories: , ,
  • Features
  • Reviews (0)

Additional information

Weight 230 kg
Dimensions 1262 × 1532 × 2729 mm

High flow rate thermostatically controlled mixing valve ensures the temperature is maintained at between 20-25°C.
Eye/face wash with integral lid ensures that the bowl remains clean and free from contamination
The unit can also be used to supply heated water to other emergency safety showers in the local vicinity via a second outlet .
316L stainless steel inner pipework for improved corrosion resistance.
Location: Indoor, Outdoor
Climate: Cold (risk of freezing), Variable
Constant Water Supply: Yes
Installation: Free Standing / Floor Mounted
Features: Eye/Face Wash
Pipework: Stainless Steel

Pipework & Fittings

316L stainless steel with 150lb medium wall tubulars and fittings


316L stainless steel

Operating Valves

316L stainless steel

Shower Spray Outlet

Moulded nylon 6

Eye/facewash Filter Strainer

316L stainless steel

Insulation & Outer Casing

Polyurethane foam insulation with a medium density polyethylene impact resistant outer casing on the
pipework, GRP on outer frame

Standard Finish

White with green/white safety stripes (alternative colours available)

Water Inlet

1 1/4” Male BSP

Design Operating Pressure

2.2 to 6 BAR G (32 to 87 PSI)
(higher supply pressures accommodated with the incorporation of the optional pressure reducing valve)

Water Temperature Set Point

20º C to 25º C (68 F to 77º F)

Heating Type

Trace tape heated and pre-insulated pipework, immersion heated tank

Heating Load

3 kW

Electrical Equipment - Non-hazardous

Suitable for use in areas classified as non-hazardous

Electrical Equipment - Hazardous

ATEX Zone 1 & 2 Gas Groups IIA and IIB, Temp Class T3 (IIC available)

Electric Supply

230V Single Phase, 50/60Hz or 110V available

Test Pressure

10 BAR G (145 PSI)

Minimum Flow at Operating Pressure

Shower – 76 litres/minute
Eye/Face wash – 20 litres/minute

Minimum Ambient Operating Temperature

0º C (32º F)

Maximum Ambient Operating Temperature

35º C (95º F)

Shower Operation

Pull handle (Optional treadle foot control for hands free operation)

Eyebath/face Wash Operation

Lift lid up (Optional treadle foot control for hands free operation)


There are no reviews yet.

Be the first to review “H-STDTC100KS11K Indoor Temperature Controlled Safety Shower with Eye/Face Wash”

Your email address will not be published. Required fields are marked *