Spill Station Floor Bund Spill Decking

The uniform low profile of Floor Bund Spill Decking means it can be configured to suit most work place environments and create a safe drum decanting and storage area.

  • Seamless single piece moulded sump prevents leakage.
  • Rotomolded for extra strength.
  • Polyethylene construction provides superior chemical resistance.
  • Removable non-slip grates for ease of cleaning.
  • Two sizes of ramps available to make loading by hand safe and easy.
  • Sump connectors available to increase the capacity of the containment area.
  • Sump plugs can be fitted if required.
  • Hi-vis safety yellow and UV stabilised.

 

 -make inquiry-   -tell a friend- 


click here

Code: 

FloorBund   

 

Single IBC Spill Containment Unit - No Grate

The TSSBB3 IBC Spill Containment Unit has integral supporting upstands and does not require a grate.

  • Suitable for holding 1 x 1000L IBC Tank
  • Rotomolded from 100% polyethylene
  • Has excellent broadband chemical resistance.
  • Recessed front for ease of decanting
  • Two way forklift access
  • Fitted with drain plugs as standard
  • Pallet Covers are also available to protect the load and sump
  • Meets EPA requirements.
Item Code Length Width Height Sump Load (UDL)
TSSBB3 1590mm 1455mm 715mm 1125 Litres 1500kg
 -make inquiry-   -tell a friend- 
Code: 

TSSBB3   

 

Dual IBC Spill Containment Unit - No Grate

The TSSBB4 Dual IBC Spill Containment Unit has integral supporting upstands and does not require a grate.

  • Suitable for holding 2 x 1000L IBC Tank
  • Rotomolded from 100% virgin resin polyethylene
  • Has excellent broadband chemical resistance.
  • Recessed front for ease of decanting
  • Two way forklift access
  • Fitted with drain plugs as standard
  • Pallet Covers are also available to protect the load and sump
  • Meets EPA requirements.
Item Code Length Width Height Sump Load (UDL)
TSSBB4 2340mm 1360mm 510mm 1150Litres 2800kg
 -make inquiry-   -tell a friend- 
Code: 

TSSBB4   

 

Mobile Dispensing Station

Why use 60L drums when an individual can safely move and dispense from cost effective 205L drums using this Mobile Dispensing Station.
Genuine single person loading allows the 205L drum to moved from vertical to horizontal for easy and safe handling.
The rotating lockable front castor allows this unit to be easily moved around you site in the horizontal position.

Manufactured from chemically resistant polyethylene, this unit will not rust or corrode and has a sump capacity to contain up to 230L of spill making it ideal for decanting 205L (44 gal) drums.

Item Code Length Width Height Sump Weight
TSSBT230 1600mm 740mm 640mm 230 Litres 44kg
 -make inquiry-   -tell a friend- 
Code: 

TSSBT230   

 

Poly Racker

The centerpiece of the Poly-Rack System is the Poly-Racker, a unique one-piece polyethylene rack that holds two 205 litre drums securely in place. A massive 400 litre  containment sump ensures spill safety even in worst-case drum leaks. The deep decanting well easily holds 20 litre pails while containing incidental spills  Poly-Rackers can be transported by forklift.
Top unit (Poly Stacker) available seperately.

Item Code Height Length Width Sump Weight
TSSDB4 485mm 1450mm 1310mm 400 Litres 50kg
 -make inquiry-   -tell a friend- 


click here

Code: 

TSSDB4   

 

Drum Funnel for 205L Drums

Decanting from one container into 205L drums can be a difficult and messy operation. The Poly Drum Funnel is made from 100% polyethylene and sits securely on the top of open or closed top drums. The 56cm diameter provides a large surface area to accept liquids, leaving the operator to concentrate on the pouring process. It is perfect for draining oil filters into 205L drums.

The lid ensures that the drum will not fill with water if left in the weather. Also available without the lid.

Size: 600mm(Diameter)
Weight: 4kg

 -make inquiry-   -tell a friend- 


click here

Code: 

TSSDF1   

 

Single Drum Dolly

Move single drums easily and safely around you work areas with the Single Drum Dolly. 
This unit will also catch incidental spills during vertical dispensing and decanting, keeping your workplace free of slip hazards. 
Made from 100% polyethylene, it will not rust or corrode. 
The four lockable castors rotate 360º for easy manoeuvrability.  Handle included.canting

Size 725mm x 725mm
Weight 15.5kg
Load Bearing Capacity UDL 300kg
Sump Capacity 30 litres
 -make inquiry-   -tell a friend- 


click here

Code: 

TSSPDDH   

 

Single Drum Stacker
  • Made from 100% Polyethylene
  • Multi purpose cradle for the horizontal storage of drums and containers
  • Ideal for use with spill pallets and spill deck floor bunding
  • Enables the safe decanting of liquids into smaller containers

 

Item Code Length Width Height Weight
TSSSBS 875mm 765mm 730mm 10kg
 -make inquiry-   -tell a friend- 


click here

Code: 

TSSSBS   

 

Small Bench-Top Spill Tray

Provides a safe decanting area for bench-top applications.

Spills drain safely to the sump.

Perfect for laboratory applications.

Made from 100% chemically resistant polyethylene.

 

Item Code Capacity Length Width Height
TSSBB25 27.5L 550mm 550mm 110mm

 -make inquiry-   -tell a friend- 
Code: 

TSSBB25   

 

Medium Bench-Top Spill Tray

Provides a safe decanting area for bench-top applications.

Spills drain safely to the sump.

Perfect for laboratory applications.

Made from 100% chemically resistant polyethylene.

 

Item Code Capacity Length Width Height
TSSBB50 29L 715mm 460mm 110mm

 -make inquiry-   -tell a friend- 
Code: 

TSSBB50   

 

Back to First Page Back to Previous Page

Page 1 of  2

 Show Next Page Show Last Page
 
 
web design sydney by WebStart Design